Home ProductsOxygen Concentrator Parts

400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm

400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm

    • 400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm
    • 400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm
    • 400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm
  • 400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm

    Product Details:

    Place of Origin: Hangzhou,China
    Brand Name: Tailian
    Certification: ISO,CE
    Model Number: CK6140B

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 pc
    Price: negotiation
    Packaging Details: wooden case
    Delivery Time: 1 month after payment
    Payment Terms: L/C, T/T
    Supply Ability: 100 pc per month
    Contact Now
    Detailed Product Description
    Model: CK6140B Max. Rotation Diameter Over Bed: 400mm
    Max.rotation Diameter Over Pallet: 245mm Max. Workpiece Length: 750/1000mm
    Main Transmission Form: Two Gears Spindle Speed Mode: Frequency Stepless Speed In Gear
    Spindle Speed Range: 60-1800r/min Spindle Head Form: 6-A2

     

    400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm

     

     

    1.description

     

    This article is about mechanically automated lathes. For CNC lathes and their technological offshoots, see turning center.
     
    Fay automatic lathe, 1921.
     
    Bullard Mult-Au-Matic, a vertical, multispindle automatic lathe, 1914.

    An automatic lathe is a lathe (usually a metalworking lathe) whose actions are controlled automatically. Although all electronically controlled (CNC) lathes are automatic, they are usually not called by that name, as explained under "General nomenclature". The first kinds of automatic lathes were mechanically automated ones, from the 1870s until the advent of NC and CNC in the 1950s and 1960s. CNC has not yet entirely displaced mechanically automated machines. The latter type of machine tool is no longer being newly built, but many existing examples remain in service.

     

     

    2.Center lathe / engine lathe / bench lathe

     
    A typical center lathe

    The terms center lathe, engine lathe, and bench lathe all refer to a basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.

    Engine lathe is the name applied to a traditional late-19th-century or 20th-century lathe with automatic feed to the cutting tool, as opposed to early lathes which were used with hand-held tools, or lathes with manual feed only. The usage of "engine" here is in the mechanical-device sense, not the prime-mover sense, as in the steam engines which were the standard industrial power source for many years. The works would have one large steam engine which would provide power to all the machines via a line shaft system of belts. Therefore, early engine lathes were generally 'cone heads', in that the spindle usually had attached to it a multi-step pulley called a cone pulley designed to accept a flat belt. Different spindle speeds could be obtained by moving the flat belt to different steps on the cone pulley. Cone-head lathes usually had a countershaft (layshaft) on the back side of the cone which could be engaged to provide a lower set of speeds than was obtainable by direct belt drive. These gears were called back gears. Larger lathes sometimes had two-speed back gears which could be shifted to provide a still lower set of speeds.

    When electric motors started to become common in the early 20th century, many cone-head lathes were converted to electric power. At the same time the state of the art in gear and bearing practice was advancing to the point that manufacturers began to make fully geared headstocks, using gearboxes analogous to automobile transmissions to obtain various spindle speeds and feed rates while transmitting the higher amounts of power needed to take full advantage of high speed steel tools. Cutting tools evolved once again, with the introduction of man made carbides,and became widely introduced to general industry in the 1970s. Early carbides were attached toolholders by brazing them into a machined 'nest' in the tool holders, later designs allowed tips to be replaceable, and multi faceted, allowing them to be reused. Carbides tolerate much higher machining speeds without wearing. This has led to machining times shortening, and therefore production growing. The demand for faster and more powerful lathes controlled the direction of lathe development.

    The availability of inexpensive electronics has again changed the way speed control may be applied by allowing continuously variable motor speed from the maximum down to almost zero RPM. This had been tried in the late 19th century but was not found satisfactory at the time. Subsequent improvements in electric circuitry have made it viable again.

     

    3.Toolroom lathe

    A toolroom lathe is a lathe optimized for toolroom work. It is essentially just a top-of-the-line center lathe, with all of the best optional features that may be omitted from less expensive models, such as a collet closer, taper attachment, and others. The bed of a toolroom lathe is generally wider than that of a standard centre lathe. There has also been an implication over the years of selective assembly and extra fitting, with every care taken in the building of a toolroom model to make it the smoothest-running, most-accurate version of the machine that can be built. However, within one brand, the quality difference between a regular model and its corresponding toolroom model depends on the builder and in some cases has been partly marketing psychology. For name-brand machine tool builders who made only high-quality tools, there wasn't necessarily any lack of quality in the base-model product for the "luxury model" to improve upon. In other cases, especially when comparing different brands, the quality differential between an entry-level center lathe built to compete on price, and  a toolroom lathe meant to compete only on quality and not on price, can be objectively demonstrated by measuring TIR, vibration, etc. In any case, because of their fully ticked-off option list and (real or implied) higher quality, toolroom lathes are more expensive than entry-level center lathes.

     

    4.Turret lathe and capstan lathe

    Main article: Turret lathe

    Turret lathes and capstan lathes are members of a class of lathes that are used for repetitive production of duplicate parts (which by the nature of their cutting process are usually interchangeable). It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform setup tasks in between (such as installing or uninstalling tools) nor to control the toolpath. (The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion [via the mechanical limits placed on it by the turret's slide and stops] or via IT-directed servomechanisms [on computer numerical controlled (CNC) lathes].)

    There is a tremendous variety of turret lathe and capstan lathe designs, reflecting the variety of work that they do.

     

    5.Gang-tool lathe

    A gang-tool lathe is one that has a row of tools set up on its cross-slide, which is long and flat and is similar to a milling machine table. The idea is essentially the same as with turret lathes: to set up multiple tools and then easily index between them for each part-cutting cycle. Instead of being rotary like a turret, the indexable tool group is linear.

     

    6.Multispindle lathe

    See also: Screw machine (automatic lathe)

    Multispindle lathes have more than one spindle and automated control (whether via cams or CNC). They are production machines specializing in high-volume production. The smaller types are usually called screw machines, while the larger variants are usually called automatic chucking machines, automatic chuckers, or simply chuckers. Screw machines usually work from bar stock, while chuckers automatically chuck up individual blanks from a magazine. Typical minimum profitable production lot size on a screw machine is in the thousands of parts due to the large setup time. Once set up, a screw machine can rapidly and efficiently produce thousands of parts on a continuous basis with high accuracy, low cycle time, and very little human intervention. (The latter two points drive down the unit cost per interchangeable part much lower than could be achieved without these machines.)

     

    condition new
    model CK6140B
    Spindle bore 48mm
    Spindle hole outside taper MT6
    Chuck diameter 250mm
    Main motor power 5.5kw
    Workpiece accuracy IT6-IT7
    weight 2000kg

     

    400mm Max Swim Over Bed Diameter Mini Cnc Lathe Machine Workingpiece Length 750/1000mm

    Contact Details
    HANG ZHOU TAI LIAN CRYOGENIC EQUIPMENT CO., LTD.

    Contact Person: Mr. Yao junming

    Send your inquiry directly to us (0 / 3000)

    Other Products